W-DRIVE - DRIVE WHEEL SYSTEM FOR LINER TROLLEYS
The W-DRIVE drive wheel system is an integrated solution that allows you to handle heavy containers effortlessly (up to 1000 kg). The system was built in such a way as to cooperate with the Liner system trolleys, but it can also be mounted and successfully used in other trolleys.
BASIC W-DRIVE PARAMETERS
W-DRIVE – DRIVE WHEEL SYSTEM </ strong>
• LI-ION battery with 24.8 Ah and 24V capacity
• Drive motor: Pmax = 350 W 24 VDC
• Maximum weight of the transported load 1000 kg
• Maximum speed 4 km / h
• Battery charging time ~ 12h
• 135 mm drive wheel diameter
• Device weight + 30 kg battery
• Maximum range of 7.5 km (assuming continuous work)
THE DRIVING CYLINDER FOR LINER SYSTEMS </ p>
The W-DRIVE drive wheel is an integrated solution that allows you to handle heavy loads effortlessly (up to 1000 kg). The system was built to work with Liner system trolleys. We have designed it in such a way as to ensure maximum safety as well as ergonomic handling of the trolley.
MAXIMUM SPEED 4 KM / H
Transport using W-Drive can be carried out at a maximum speed of 4 km / h on straight sections.
Trolleys equipped with the W-Drive drive wheel system have excellent control properties, they can even be rotated in place – thanks to the central position of the drive wheel.
MAXIMUM LOAD 1000 KG
The drive wheel allows you to transport loads up to 1000 kg. This means that manual transport of very heavy containers is possible.
CONTROL BUTTONS – SAFETY AND MOTION
W-Drive has been equipped with certified security solutions. To start using the trolley equipped drive wheel, the battery must be turned on using the key. The next step is to turn the start button on the top of the handle. The drive wheel is started when the movement button is held in the right way (too strong or too weak pressure causes immediate stop).
BATTERY REPLACEMENT AND ENERGY CONSUMPTION MANAGEMENT SYSTEMS
The W-Drive drive wheel system is equipped with a display – a battery indicator on the handle. When the power is low, the wheel is automatically raised, also the battery change is easy and takes only a few seconds.
DEMONUTABLE HANDLE – IRDA COMMUNICATION, POWER SUPPLY
Communication between the controls in the handle and the drive systems is established using the IrDa protocol – a shock-resistant sensor. The wireless connection allows you to remove the handle at any time and use it in any other trolley. The system also does not have unprotected wires that could be damaged during use. The power supply is provided by a socket connection secured by a steel structure of the holder located both on handle and trolley.
AUTOMATIC LIFTING THE DRIVING WHEEL
The drive wheel system gets automatically lifted during the docking in the E-LINER transport platform. During its undocking, the wheel is also automatically lowered and pressed to the ground. The operator does not have to perform any additional activities. The wheel also automatically rises when the battery power level is extremely low.
POSSIBILITY OF MANUAL LIFTING/LOWERING OF DRIVE WHEEL
If necessary, it is possible to manually adjust the position of the drive wheel with the UP / DOWN buttons on the handle. This is a useful function if, for example, you want to push the empty trolley to the side due to the lack of enough space to rotate in it.
POSSIBILITY TO ADJUST THE TROLLEY PARAMETERS
Many parameters can be changed according to the customer’s expectations – without the need to replace components. These include, among others: maximum speed of movement, speed of acceleration, speed of raising / lowering the wheel.